Scotsman Hotel Ice Dispenser Repair
Although Scotsman Hotel Ice Dispenser Repair technicians provide great services, some ice machine repair tasks and ice dispenser repair projects can be tackled without a professional.
Ice Maker Not Making Ice
When the temperature in an ice maker is higher than 10 degrees Fahrenheit, the unit will not function properly. If the temperature is between zero and five degrees, the components will always produce quality ice. By cleaning the condenser coil and fan, the temperature will stay under five degrees. Frost can cause temperature problems too because it prevents air circulation around the evaporate coil. Frost usually builds up when the defrost components fail.
Water Dispenser Not Working
A defective water inlet valve will make the water dispenser fail. Low water pressure can affect the water dispenser too. Most ice makers will only function when the water pressure is 20 psi or higher.
If the supply tube freezes, water will not travel to the dispenser. The connect point is usually found near the door. To troubleshoot this issue, disconnect the hose and push air through it. If the air travels through the hose, it is not frozen. If the air doesn’t flow out of the other end, thaw the hose with hot water.
Ice Dispenser Not Working
When the control board is defective, the ice dispenser will not work. However, if a single component of the system is not functioning, you must test each element separately.
The dispenser switch should be inspected too because it controls the dispenser actuator. Use an Ohm meter to test the continuity; if the dispenser switch doesn’t have a reading, it must be replaced.
The dispenser will also fail to operate if the actuator is defective. When the auger motor functions, the actuator and the dispenser interact together. If the actuator is faulty, the switch will not work properly.
Commercial Ice Maker Repair Guide
If the water flow decreases, the water supply line may be clogged. If this problem is ignored, the unit will produce undersized ice cubes. In addition, production will halt over time after the evaporator freezes.
If water leaks inside of the ice machine, the inlet valve has a leak. This issue will also halt production because oversize cubes will stick to the evaporator.
Ice Maker Repair – Ice and Water Dispenser Not Working Properly
A Scotsman ice maker repair should have six inches of clearance. If the condenser overheats, the unit will not make ice fast and efficiently.
Mineral deposits can affect how the ice gathers on the evaporator plate. If the plate cannot produce heat, ice will continue to grow on the surface. When the ice gets too thick, the block will not drop into the bin. Typically, businesses that have low quality water have serious water scale and mineral deposit problems.
A commercial ice maker repair malfunctions when the condenser is not properly cleaned. The condenser coils are located on the side of the unit and behind the vents. When air travels through the vents, it is filtered as it moves away from the ice dispenser. Dust and grease will build up on the coils near the vent over time appliance repair , so you must wipe the surfaces often with a damp rag.