In some cases Samsung cleaning machines concern UC, 9C, 9E1, or 9E2 mistake report electrical energy issues. These codes appear on various Samsung designs and signal one issue. There can be partial distinctions carefully.

When does the UC error code appear in Samsung cleaning machines
To determine the meaning of the UC error code, show when it shows up on display. The Samsung washing equipment creates a mistake:
After the start of washing, when the hatch locks, as well as you push the beginning switch;
After the first collection of water;
After the heating element turning on;
During rotating, when the drum beginnings to spin.
A UC mistake may show up on screen at any various other time during procedure. The service of the problem depends on the proper meaning of the cause.
The definition of the UC mistake code
The UC mistake suggests power problems. If the cleaning machine deals with an increase or lower in voltage, then throughout the washing process it reveals a mistake.
The UC error illuminate on the cleaning maker display screen when the system solutions an uncommon voltage for 30 secs.
Samsung washing equipment designs, launched prior to 2012, did not respond at power surges from 175 to 270 V. Modern versions have ultra-sensitive network filters.
At a short-term power surge, the UC code disappears by itself. The cleaning equipment proceeds the washing program immediately.
Why does the mistake happen?
When the UC error illuminate on the cleaning device screen, the reasons for this are:
Breakdowns in the outlet;
Use of incorrect or poor-quality extension cord;
Sharp voltage dive;
The voltage in the network is not representing the standard;
Temporary failure in the control system of the cleaning device;
Issues in the control component.
If the UC shows up, in most cases, you can remove the trouble yourself.
How to take care of the problem
You can go down the fault by resetting the washing device. After that, you need to examine whether the mistake code comes back. For this you need:
Disconnect the device by pushing the suitable button as well as taking the cord out of the outlet;
Wait 5 mins;
Plug in as well as reboot the washing maker.
If hereafter, the maker works and no more problems the UC code, so there was a short-term voltage failing. If the code illuminate once again on screen, then you require to look for a factor to take care of the problem.
To eliminate the highlighting UC code, you need:
Examine the electric network and its voltage.
Install the voltage regulator, which permits making up voltage drops;
Inspect the electrical outlet and electric circuitry for service;
Remove the extension cable (if you link the device to the network using it) and connect straight to the outlet. The electrical outlet needs to be secured against wetness to ensure that you do not get electrocuted.
If after inspecting, the device remains to show a power failing, there is a faulty control module. Call a professional to resolve the issue.