The HE1 mistake in Samsung washing equipments is quite a common one. It can show up at any phase of the home appliance’s job. There are not numerous factors for this mistake. Yet all the instances stand for a significant threat. If the control module quits the technique, providing this mistake, it conserves your tool from an extreme failing.

The meaning of the he1 error in Samsung washing machines
When it comes to Samsung washing maker self-diagnostic system, note the following. Any type of code starting with the English letter “H” shows the burner troubles. Subsequent letters as well as numbers specify the sort of problem. In our case, the HE1 mistake implies that the water in the container heats greater than 400 ° C in 2 mins. It implies that the burner runs up also promptly. The component does this no matter the algorithms defined by the washing program.
H1 and HE1 errors take place in 2 cases:
the cleaning device practically boils water home heating it to 95 levels;
water heats up as well rapidly (more than 40 levels for 2 minutes).
If the self-diagnosis system does not stop water heating in such circumstance, the burner will quickly bring it to a boil and also shed. As a result, the boiling water will harm delicate laundry that you potentially place in the drum for cleaning.
The HE1 error embarrasses specialists. So, the heating element is working, there is no breakage, but something makes it work inaccurately. That is why the three-digit codes of the self-diagnosis system of Samsung cleaning machines are better. These codes transfer information concerning the breakdown much more properly than two-digit ones. It provides the master the chance to save time on troubleshooting.
Feasible causes of error
What failures cause the HE1 mistake? There are 2 cases of failings: when the temperature level sensor stops working and when the control board breaks down.
The temperature level sensing unit sends info about the heating element turning on. By ways of this sensing unit, the control module can change the heating element temperature according to the cleaning program. If the thermal sensing unit breaks, the control component can not regulate the work of the burner. By default, after the Samsung cleaning equipment changing, the tool begins to heat up to the maximum. The control component does not get info from the temperature sensing unit for numerous minutes. Therefore, the home appliance instantly turns off the burner. The HE1 mistake appears. The washing machine’s operation quits.
Samsung cleaning equipments producer sets up the temperature level sensing unit straight on the burner. So, it is uncomplicated to find it. Yet your job is to reach the heating element.
The break down of temperature sensors in Samsung cleaning equipments is quite common. Yet sometimes such a sensor is not the factor for the breakdown. So, what is the source of the mistake? In this situation, the factor for the failing depends on the control component. If the track or triac running the heating element burns, this additionally leads to the HE1 fault. In fact, the fixing of this part is harder as well as expensive.
Breakdown elimination
The heat sensor is difficult to fix. The only option is to alter it. In order to make sure that the component is out of order, check it with a multimeter. After that, give the total substitute.
To examine as well as replace the temperature sensing unit, you need to remove the front wall of the Samsung washing machine. Having actually reached the heating element, do the complying with.
Disconnect the cable from the temperature level sensing unit, and after that pull the dismantle of the specific niche.
Procedure the resistance of the sensing unit with an unique gadget called a multimeter. If the gadget shows 0 or 1, throw out the failure temperature level sensing unit and put a brand-new one in its location.
After that put together as well as check the repaired cleaning equipment.
If the temperature level sensor is undamaged, there is no problem with its cables and supplying calls, so the issue remains in the control module. Experts suggest not to fix the Samsung washing device control module on your own. You had better hand over the repair of the electronic component to a professional.
Summing up, note that the deciphering of the HE1 error in Samsung washing devices is rather very easy. But removal of the breakdowns that the mistake signifies around is hard.