6Е (Eb, bE, bC) error indicates about the troubles in the electronic devices of Samsung washing machines. Codes differ relying on the day of the devices manufacturing.

Mistake codes in old and also brand-new washing devices
Until 2007, Samsung cleaning machines revealed the Eb code. Although it is a lot more appropriate to check out the code as bE, bE1, bE2. In the tools without an electronic display, the trouble was indicated by the illumination of cool water temperature indications. So, the 40 and 60 degrees icons illuminated simultaneously.
A full list of designations, similar to the 6E mistake in the cleaning maker:
bE with additional numbers (bE1, bE2, bE3);.
occasionally the order of letters adjustments– on Eb;.
in some designs, the inscribing bC (or bC2) is made use of.
Causes of malfunctions.
The 6e error signals concerning the problems with running the innovation. There are 3 usual reasons when the gadget reveals the 6E error code:.
thyristor switch is out of order;.
there are issues with the control buttons;.
the failing occurred in the digital controller of Samsung washing makers.
Before fixing, attempt to make clear in which device the malfunction occurred. If you’re an owner of the cleaning maker with the screen for 3 personalities, this task is a lot easier for you:.
the bE1 fault signals a problem with the power button;.
bE2 (b2 or bC2) focuses on problems with various other tricks of the cleaning device;.
if the bE3 error light up, there is a problem with the control system.
Just how to take care of the 6E error code.
6E can show up on a display at any stage of the washing machine operating. The mistake can happen at the start of washing, and right before completion of the process.
When the codes of this team show up, it is rarely possible to eliminate the error without the help of an expert.
Samsung washing equipments are geared up with a collection of sensing units. Each of them can fall short. To reset the mistakes, it suffices to reactivate the electronics. For this, shut off the equipment from the network for a few mins as well as turning it on again.
Socket electrical outlet malfunction.
Disturbances in the existing supply can drive the gentle Samsung electronics insane. This takes place if the plug’s connection with the outlet is not limited enough.
To eliminate the mistake, take care of the electrical contractor. As a result, replace the socket, the plug of the cleaning device or repair the electrical wiring.
Buttons do not do its functions.
If the device issues the 6E mistake code, maybe there is a not enough contact of the buttons or their sticking after pressing.
Attempt holding the trick for concerning a minute or press it a few times. The fastening of the front panel of the cleaning device likewise aids.
Sources of the error.
If you can not manage the problem yourself, as well as the device reveals the same mistake on the screen, so check out the table below. It will certainly help you to understand the significance of a certain behavior of the appliance.
| Malfunction | Possible reasons | What to do |
| 6E (bC) appears after the start of the program. The washing machine turns the drum, as when pressing. The technique starts in the normal mode, but it does not cope with the pressing process. Thus, the technique hangs. | Closing the contacts led to a breakdown of the triac. | It is necessary to replace the unit. Perhaps, you will need to do it along with diodes and relays. |
| The drum of the washing machine spins to the limit. Then, the Eb error appears on the display. | The Hall sensor is broken. As a result, the control triac malfunction occurs. | Provide the tachogenerator diagnostics. In case of insufficient contact, improve the fastening. Also, replace the burnt out part. |
| The washing machine doesn’t start. In a couple of minutes, the 6E error or similar indicator lights up. | The motor relay damage. (As a rule, it occurs after a poor-quality repair, after which the contacts get oxidized or ruined). | Soldering eliminates the problems with the legs or relay contacts. Replace the burnt out part. |
| The 6Е error code periodically lights up. | Insufficient contact between the wires (they are worn out or chafed). | To restore the machine’s operating, inspect the contacts. You need to clean and reconnect them. In difficult cases, you have to replace the plume completely. |