The e12 error code in Bosch washing machine implies that the moment of waiting on water to enter the washing machine has been surpassed. Numerous Bosch washer models have a different response time as well as errors showing. Anyway, as a rule, it is up to 5-6 minutes.

Extremely typically in some models of washers, the e12 error code is identical to the e11 one. For that reason, the like e11 error, the e12 one means that the container does not obtain water.
Factors for it:
The tap is closed.
The cleaning maker water tube is squeezed.
The filter inside the water pipe is clogged with particles (rust, plaque, etc.).
The AquaStop system (leak security) is out of order. It offers a dud and also blocks the water.
Short circuit in the cords.
Fix the e12 mistake in the Bosch washing machine.
Start troubleshooting with the easiest techniques. So, check if there is water in the water pipe as well as if there is enough water pressure.
Next off, evaluate the beyond the water system hose pipe. If it’s okay, unscrew it from the washing machine, and also tidy the inlet part of the filter.
The e12 error caused by AquaStop activation.
Any type of AquaStop shutoff will certainly obstruct the supply of water to the washing machine and also turn it off for the next factors:.
There is a tear of the filler pipe connected to the body of the device. The tube can likewise damage as well as break, or be reduced with a sharp item.
There is a leak of water inside the body of the gadget due to the failure of any part.
Occasionally AquaStop shows an incorrect trigger. There is no leak, yet the gadget still urgently drains water and does not start washing. In this case, inspect these information for functionating:.
an electronic control unit of the washing machine;.
the sensing unit of protection versus water leakage.
How to inspect the AquaStop safely.
The best alternative when the system of protection versus water leakage sets off is to disconnect the washing machine from the keys. Be sure to delegate the AquaStop evaluating to an experienced repair professional!
When you start checking the washer without specialist assistance, keep in mind the safety rules!
It is safe to check the AquaStop as adheres to:.
With completely dry hands, detach the plug of the washing machine cable from the electrical outlet.
Totally close the supply of water tap to the system.
Drain pipes water from the washer.
Open the hatch as well as go out the linen.
Inspect if there is water in the washer tray.
The pallet is a steel or plastic container with a water sensor placed in it (a “float” with an electrical microswitch).
If the pallet is completely dry, you require to describe the directions. Discover the area that describes what to do in situation of the “Leakage” mistake.
If there is water on the pallet, not delay the problem. Request help in a reputable and also legally functioning solution facility! In case of leakage, only the qualified expert can discover the causes for failure as well as repair the product.