Kenmore Refrigerator Repair
There are lots of things that can go wrong with your stainless steel refrigerator, even your Kenmore Refrigerator Repair can experience hiccups in its performance. Sometimes it’s as easy as cleaning out dust that’s collected over the years, but other times it can take the expertise of a Kenmore refrigerator repair professional to replace overworked refrigerator parts. This article will help you troubleshoot some of the more common problems and help you determine when it’s time to call for help.
No power
Power source issues are a big deal, especially when a fridge full of food is at stake. There are a few things you can do when faced with no power for any appliance repair . First check the power source by making sure your appliance is plugged in. Then crosscheck the power supply to the outlet by plugging in something else you know works. The best case scenario would be a simple blown fuse. If that’s not the case, the issue could be much more complicated. For a refrigerator, it could be a blown compressor, thermostat malfunctions or wiring problems.
It won’t keep its cool
Cooling issues can crop up regardless of what type of refrigerator model you have, bottom-freezer, top-freezer, even undercounter refrigerators. The troubleshooting trick (after you have checked the power source) is in the compressor. The compressor is usually located on the lower backside of the refrigerator. You won’t be able to visibly tell if it is running properly, but you should be able to hear it. It should be steadily humming along. If you can’t hear it, the problem likely lies with the compressor.
Poor sealing gaskets
French door models, with the freezer and the refrigerator side-by-side, have their own unique set of complications. Specifically with gaskets. If you have ever used one of these models and closed one door only to have the other door pop open then you know understand. It happens because the freezer and refrigerator compartments are connected by channels of air. When one door is slammed it creates pressure that transfers to the other door. An easy solution is to check the gaskets. Make sure they are clean, undamaged and lubricated. You can lubricate them yourself with Vaseline. You can also control the force of pressure movement by adjusting the refrigerator’s leveling legs to tilt slightly backwards and even adding some weight to the freezer door. Both of these tricks use physics to prevent the door from popping open.
Stopped up icemakers
Automatic icemakers are useful, but they are also a common contributor to refrigerator repair problems. If your refrigerator won’t produce ice there are a few things you can do. First, give your ice bin a good shake and break up any ice clumps that may have formed as a result of the icemaker’s automatic defrost cycle. Adding more food to the freezer will prevent this from happening by absorbing some of the excess heat. In some cases, like the Kenmore french-door bottom-freezer refrigerator models, the issue can be more complicated. Its ice and water dispensers are on the interior of of the refrigerator, which can cause the lines to freeze. Run a blow dryer over the lines to get things moving again.