Kitchen Aid Microwave Repair
Your Kitchen Aid Microwave Repair countertop microwave oven is the perfect way to melt chocolate for Friday night’s get-together or simply reheat that morning cup of coffee that you never got around to because spousal or parenting duties called. However, if your microwave is on the fritz, it can leave you with cold coffee and solid chocolate. But don’t fret, a Kitchen Aid appliance and repair service technician can restore your microwave back to its original state. Before contacting your Kitchen Aid technician, try these troubleshooting tips to see if they solve the issue.
First thing’s first, if your microwave isn’t working, always inspect your appliance for the obvious. You’d be surprised how an unplugged appliance or an improper connection between the electrical prong and the wall socket may simply be the issue. Sometimes a tripped circuit breaker could be the culprit. Be sure the appliance is indeed plugged in, there is a proper electrical connection and the circuit breaker has not tripped. If this does not solve the issue, inspect the line fuse to be sure it isn’t blown. The line fuse is designed to blow anytime excessive current is drawn through the microwave circuitry. If this still does not solve the problem, it could be that the thermoprotector has tripped. Inspect the thermoprotector to be sure it is functioning properly. If this still does not address the problem, it could be the main control board, at which time you should contact your Kitchen Aid appliance repair for professional repairs.
Does your Kitchen Aid architect series microwave oven or other model microwave oven cease to get hot? It could be that one of the door switches has gone bad. There are usually 3 door switches on a microwave. If one of them fails, the microwave will not heat. Inspect the door switches with an Ohm meter to be sure they are working. If they are functioning properly, it could be a number of other electrical issues including the high voltage transformer. Contact your local Kitchen Aid repair technician for immediate service today.
Does your Kitchen aid microwave with convection cooking and easyconvect feature display an error code? There could be various reasons why this would occur. Try disconnecting the microwave for about 30 seconds, then reconnect. Wait about 1 minute after the power has been reconnected. If the error code still exists, it could indicate an electrical part failure. Contact your Kitchen Aid microwaves repair technician who is highly knowledgeable and trained in the safety and repair of electrical parts to address the issue.
Is the door on your built in Kitchen Aid microwave with Crispwave Technology stuck? The door latch could be broken. The door latch is located inside the microwave appliance repair . Once the door hook engages the latch to keep the door closed, if the latch is broken, it will prevent the door from opening. Sometimes the issue could be the open lever. If the open lever is broken, it will also prevent the door from opening. Your Kitchen Aid specialist can inspect the microwave door for defective parts including the door springs, door hook, button spring and handle actuator and make necessary repairs to ensure your microwave remains functioning the way it was designed to.